NISCO, Inc.

47893 - 1-1/4" NPTB42S-180 Inverted Bucket Steam Trap, Cast Iron, w/ Integral Strainer & Bimetal Air Vent, Stainless Steel Bucket - Spirax Sarco

MPN: 47893
$1,662.00

Inverted Bucket Mechanical Steam Trap | Type Inverted Bucket, Inline Horizontal | Nominal Size 1-1/4 Inch | End Connection Threaded x Threaded | Condensate Capacity 6300 Pound per Hour | Material Cast Iron | Material Specification ASTM A126 CL B | Temperature Rating 450 Deg F | Pressure Rating 180 PSIG | Media Handled Steam and Condensate | Inclusions/Features Stainless Steel Bucket, Valve Guide Plate, Graphite Cover Gasket, Hardened Stainless Steel Valve Seat/Ball Valve Head, Stainless Steel Valve Lever, Plug-In Standard, Integral Strainer and Bimetal Air Vent | Application Steam Main Drip Station, Laundry Equipment, Industrial Dryer and Storage Tank | Orifice Diameter 9/32 Inch | Overall Dimension 9.3 Inch Width x 7 Inch Depth x 12.8 Inch Height

Manufacturer Catalog Page

Manufacturer Data Document

Manufacturer Installation Instructions

Product Features / Technical Specifications
Material Cast Iron
Additional Information Orifice Diameter 9/32 Inch | Overall Dimension 9.3 Inch Width x 7 Inch Depth x 12.8 Inch Height
Application Steam Main Drip Station, Laundry Equipment, Industrial Dryer and Storage Tank
End Connection Threaded x Threaded
Features & Benefits The Trap Contains an Inverted Bucket Mechanism Which Responds to the Difference in Density Between Steam and Condensate | The Discharge Action is Cyclic | Condensate is Discharged Close to Steam Temperature | The Bimetal Air Vent Allows Rapid Air Removal on Cold Start-Up | The Vent Closes at Approximately 200 Deg F, and will Remain Closed During Normal Operation of the Trap | Near Continuous Condensate Discharge with Tight Shut-Off | Minimal Back-Up of Condensate Ensures Maximum Plant Efficiency | Deep Water-Seal to Protect Against the Possibility of Steam Loss | Suitable for Superheat Conditions when Fitted with Internal Inlet Check Valve | Simple and Robust Construction to Guarantee Long Life Against Waterhammer and Vibration | Stainless Steel Internals are Attached to the Cover for Ease of Maintenance | Made in USA
Inclusions/Features Stainless Steel Bucket, Valve Guide Plate, Graphite Cover Gasket, Hardened Stainless Steel Valve Seat/Ball Valve Head, Stainless Steel Valve Lever, Plug-In Standard, Integral Strainer and Bimetal Air Vent
Individual Item Weight 40.000 Pound
Material Specification ASTM A126 CL B
Media Handled Steam and Condensate
Nominal Size 1-1/4 Inch
Pressure Rating 180 PSIG
Series/Model B4
Temperature Rating 450 Deg F
Type Inverted Bucket, Inline Horizontal
NISCO Inc. Line Card

Please take a moment to download and review the NISCO Inc. line card. By doing so, you will be able to view all the brands and products that NISCO Inc. distributes and/or represents.